Sending vCard – “You can’t send a message on behalf of this user unless you have permission to do so … ” – Outlook 2010
If you run into this message while trying to forward a vCard using Outlook 2010 (likely 2007 as well), you are dealing with a hidden x400 "FROM" address inside the contact metadata. When a contact is created, outlook will cache the "from" address and reference it instead of the actual account being used to send. You will see this when contacts are imported and exported between exchange services, and apparently POP3 as well.
Sadly, there are only 2 resolutions and neither of them are global.
1) When you see the “FROM” field appear while forwarding a contact, manually click "From" -> "other e-mail address" -> and choose your name from the list.
This will change the “from” address to your correct address, hit send, and life is good.
2) You can manually create new contacts and copy the information from the old to the new.
DO NOT right click and copy a contact, you need to make a new contact and copy each field over individually.
If you copy a contact, it will transfer the x400 metadata.
I strongly feel this is a bug and Microsoft should look at removing the reference to the old address.
One of our clients recently reported an issue with a hosted exchange account failing to send/receive automatically. On pretty much every hosted exchange or mapi exchange account Outlook will begin to send immediately. This is a nice feature and requires no manual intervention hitting "send/receive" on a regular basis.
This particular issue normally calls for the following checks:
- Disable antivirus/security suites
- Ensure the outbox is not loaded with extra large messages that delay sending
- Verify connectivity between client and server (ping/telnet is generally sufficient)
- Verify if send/receive works manually
- "Outlook /safe" to disable add-ins or extensions and test
Followed by the more aggressive actions:
- Delete the mail profile and re-create
- Complete a repair install of Office
- Completely remote office and re-install from scratch
What happens if you're still stuck?
You can then proceed to the first thing you should have checked (unlike me):
Outlook -> File -> Options -> Advanced -> Send and Receive -> Turn on "Send immediately when connected"
How the customer managed to turn this off is one of life's grand mysteries. I should mention that even after re-installing Outlook/Office from scratch, this setting did not default back to factory settings. In recent versions of Outlook, preferences are stored as a convenience should you ever re-install. I would love to see the Microsoft team to release an outlook command line switch to reset outlook to factory defaults.
I recently ran into a major issue trying to remove an installation of Office 2007. For whatever reason the normal methods of removing the software did not work.
If you run into this situation, checkout this tool from microsoft:
This little tool manually uninstalls everything and skips the normal checks from add/remove programs.
Are you looking to ensure emails are delivered and read on every outgoing email?
You can use the instructions below to configure this setting in Microsoft Outlook 2007.
1) Open Outlook
2) Select the “Tools” drop down and choose “Options”
3) Under the “Preferences” tab, click “E-mail options”
4) Click “Tracking Options”
5) In the middle of the page you will see “For all messages I send, request:”
a. Choose Read Receipt and/or Delivery receipt.
6) Click “OK”
You can confirm this feature is working by creating a new e-mail and choosing the "options" tab.
If setup correctly, you will notice the appropriate check boxes for Delivery and Read Receipts will match by default.
With the release of Office 2007 we found quite a few users reporting a very annoying "Final Markup Showing" in Word 2007 after an upgrade from 2003. The issue is fairly simple. Microsoft Word has several features to assist you with tracking changes to your documents. By default Word shows all of these changes. These markups are also extended to anyone who opens the document.
This VBA macro will make MS Word start up in "Final" as opposed to "Final Showing Markup."
Just dump these lines into a module in your Normal template (hit ALT+F11 to start up the Visual Basic Editor, right click modules under the -Normal- directory and add a Module). Since the name of this sub is "AutoOpen," it will execute whenever you open a document.
''''''''' VB Start '''''''''
.ShowRevisionsAndComments = False
.RevisionsView = wdRevisionsViewFinal
CommandBars("Reviewing").Visible = False
'''OPTIONAL: previous line turns off Reviewing toolbar
''''''''' VB End '''''''''
If you're working along and run into an issue when running spell-check that will not allow you to store a valid word to the dictionary, you've run into a language / localization issue. Verify that the default language option on the custom dictionary is set to "ALL LANGUAGES". If this value does not match the default spell-check language, it will assume an incorrect dictionary look-up for your custom words.
1) Ensure you have a word that is underlined and recognized as incorrect
2) Hit f7 to begin spell check
3) In the spell check window take note of the "Dictionary Language"
4) Hit "Options" and then "Custom Dictionaries"
5) Highlight the custom dictionary and check that the "Dictionary Language" matches the language above.
If not, to avoid headaches change the custom dictionary language to "ALL Languages:".
Pretty much everyone uses the auto-lookup feature built into all versions of Outlook. You start your e-mail, enter the recipients name and BAM! The address is automatically fired into the address line and you're on your way. What happens when that list is full of old addresses, duplicates and a huge list of people you no longer require?
Outlook 2003 and 2007 maintain this particular list by storing each record into an NK2 file. If you would like to clean up the list, we recommend checking out a product by nirsoft.net.
In a matter of minutes you can load the NK2 file, trim the excess fat and have your list streamlined.
This is an excellent tool for Exchange Migrations. The NK2 file also associates local X509 addresses with the parent exchange server. This tool will allow you to delete those records and avoid resolution looks to an old exchange server after a migration.
If you open the Microsoft Office Outlook 2007 Address Book and do not see the name or e-mail address you are looking for, you might need to choose another address book from the Address Book list. If you find yourself choosing another address book frequently, you can change the default address book that is displayed when you open the Address Book. By default, our Hosted Exchange customers will receive the GAL (Global Address List) instead of your local contacts folder. This can be changed to pick your contacts first.
If you wish to change the default contact list used when you hit to:, cc:, or bcc:, please follow the steps below.
- Open Microsoft Outlook 2007
- On the Standard toolbar, click Address Book
Tip You can also open the Address Book by clicking Address Book on the Tools menu.
- Click Tools, and then click Options.
Note If you open the Address Book from an open message, the Tools menu is not available. The Address Book must be opened by either method described in Step 1.
- In the Show this address list first box, click the name of the address book that you want.
- Click OK, and then close the Address Book.
When upgrading from Outlook 2003 to Outlook 2007 or 2010, the existing mailbox type may default to non-unicode PST/OST which will confine you to a maximum 2GB mailbox. Starting with Outlook 2007 and now Outlook 2010, a new UNICODE pst/ost format was released to allow for larger mailboxes.
To check the format on your current PST/OST:
1) Load the control panel and double-click "Mail (32-bit)"
2) Load the settings for your current PST/OST and click the "Advanced" tab
3) Near the bottom under "Mailbox Mode" you will see the type.
Unfortunately you cannot convert a non-unicode to unicode on the fly.
Ensure you backup the contents of your PST or OST file to a unique location before proceeding!!
1) Delete your current mail profile from Microsoft Outlook (use the same Mail-32 app in the control panel to do so)
2) Click Start, click run, type regedit and then click OK.
3) Locate and then click the following registry subkey:
5) Double-click NewPSTFormat.
6) In the Value data box, type the value, and then click OK.
* 0 - Default Unicode
If you set the NewPSTFormat registry value to 0, Outlook 2007 uses the Default Unicode setting. You can use the Default Unicode setting if you want to connect a Windows SharePoint Services list to Outlook 2007.
* 1 - Default ANSI
If you set the NewPSTFormat registry value to 1, Outlook 2007 uses the Default ANSI setting. This setting does not prevent Outlook 2007 from creating a .pst file in Unicode format for a Windows SharePoint Services list. When you add a Windows SharePoint Services list to Outlook 2007, Outlook 2007 automatically creates the .pst file in Unicode format to store the list information.
* 2 - Enforce Unicode creation (THIS SETTING IS RECOMMENDED)
If you set the NewPSTFormat registry value to 2, Outlook 2007 creates Unicode pst files for any automatically created pst file (for example, a SharePoint pst). If you manually create a new pst file, you can only create Unicode pst files because the ANSI pst option is disabled. If you have an existing ANSI pst file, it can be used with your Outlook profile.
* 3 - Enforce ANSI creation
If you set the NewPSTFormat registry value to 3, Outlook uses the Enforce ANSI creation setting. Using this setting prevents Outlook 2007 from creating a .pst file in Unicode format. You cannot use the Enforce ANSI creation setting if you want to connect a Windows SharePoint Services list to Outlook 2007.
7) Click Exit on File menu to exit Registry Editor.
8) Open Microsoft Outlook and re-create youre mail profile
9) Return to the start of this document and check what the format your newly created PST or OST.
10) If you confirm Unicode and you are NOT connected to an Exchange Server, import your backed up PST contents.
Your PST or OST file should utilize the new unicode format and grow past 2GB.